Tire Steel Wire Separator
The sidewalls cut by the tire ring cutter contain a large number of steel wires. the use of a tire steel wire separator can efficiently achieve the separation of rubber and steel bead, respectively, the recovery of rubber and steel wire, and improve the utilization rate of materials.
- Capacity: 120pcs/h
- Motor Power: 18.5KW
- Application: Separate steel wire and rubber from tire sidewalls
- Service: Warranty, installation, technical support, etc.
Key Features of the Tire Steel Wire Separator
Parameters of Tire Steel Wire Separator
| Model | SWS-100 steel wire separator |
| Capacity | 120pcs/h |
| Motor Power | 18.5KW |
| Machine Weight | 1800kg |
| Machine Size | 2*1.9*1.8m |
steel wire separator
tire bead wire remover machine
tire steel wire separator
tire wire removal machine
tyre steel wire separator
How Does the Tire Wire Removal Machine Work?
The tire steel wire separator mainly includes: frame, two relatively rotating rollers, a motor and transmission system, a control system, inlet and outlet. It works as the following steps:
- Put the tire sidewall cut by the tire ring cutter between the two rollers.
- The two rollers rotate relative to each other at the same speed, and the rim is clamped into them for strong extrusion.
- The tire sidewall is squeezed, sheared, and torn between the rollers.
- Under the repeated rotation of the rollers, the gel is completely separated from the rim.
- Ultimately, the steel rim and rubber are completely separated, and the steel wire is discharged separately, which is convenient for subsequent processing or recycling.
If you’d like to learn more about how to separate steel rings, please read：